WE ARE SOLD OUT
UNTIL NEW STOCK ARRIVES FROM TwEECer. Our
first scheduled ship date is Thursday evening, June 7th.
Looking for updates?
Scroll down to free update below.
We sell the TwEECer RT, the real time tuning tool/datalogger
for the EEC-IV/V. They are $550US
delivered. If you have questions,
please e-mail us.
For USA (no taxes added) and all Canadian provinces except
Ontario (6% GST added), use the button below to purchase:
For Ontario only (6% GST and 8% PST added), use the button
below to purchase:
IMPORTANT For Canadian clients only if you use a US dollar
credit card to fund your payment, click on Conversion options and select
Bill me in the currency listed on the seller's invoice. to be
charged in USD. Otherwise, if you leave
Use PayPal's conversion process to complete my transaction using
my card's currency. selected, your USD card will be charged in CDN, and
you will pay currency conversion charges twice.
More information on the TwEECer can be found here:
You can download and install the software at the link below
to try it out, or if you have purchased a TwEECer - no software CD is included
when a TwEECer is shipped, you MUST download it:
http://www.tweecer.com/downloads.htm
You need:
Borland
Database Engine Required
RT130A9 --
Alpha release 9
Manual --
All the getting started info you need (rename the Getting Started.pdf file from
this update to GS.pdf and replace the existing GS.pdf in the STKR 1.30
directory AFTER you install the above 2 programs)
Here are the
SHO NUT Performance-only updates you will need a 4-channel version of CalCon,
and A10 for CalEdit, along with the updated data files required to use
them. Simply replace/add to the
existing files after installing the above A9 release.
STKR 1.30
Directory:
http://www.shonutperformance.com/CALEDIT.EXE
http://www.shonutperformance.com/CalCon.exe
Data
Directory:
http://www.shonutperformance.com/PLXG.DBF
http://www.shonutperformance.com/ZEITRONX.DBF
http://www.shonutperformance.com/CHR25BAR.DBF
http://www.shonutperformance.com/X2J.DAT
(free update, work in progress, last
update 7/17/06, thanks Adam Parrott, SHO NUT/Adam client-only additional
updates and support coming soon)
http://www.shonutperformance.com/D4U1.DAT
(free update, work in progress, last
update 5/13/06, thanks Adam Parrot, SHO NUT/Adam client only additional updates
and support coming soon)
MAF
Directory:
http://www.shonutperformance.com/MarkVIII80.MAF
We are working on a more complete page of our own, but for
now, here are some files to view (note that any comment about datalogging only
applies to the RT, and not to the base model):
http://www.shonutperformance.com/X2J_Josh.bin stock X2J binary (MTX SHO)
http://www.shonutperformance.com/D4U1_BB.bin stock D4U1 binary (ATX SHO)
For the above 2, download the latest software from the
TwEECer site, install, and open the .bin files to look at stock SHO settings.
http://www.shonutperformance.com/X2J_money_shot.gif early software datalogging shot, stock car
http://www.shonutperformance.com/blower_TwEECer_logging_screen_money_shot.gif - early software datalogging shot, blower
car
http://www.shonutperformance.com/blower_TwEECer_datalog_money_shot.gif
- exported log, blower car
http://www.shonutperformance.com/Stock_RT_Datalog.gif
- intermediate software datalogging shot, stock car
http://www.shonutperformance.com/Stock_RT_Datalog.PDF
- Excel chart of RT datalogged parameters
http://www.shonutperformance.com/Stock_RT_Datalog_Data.gif - exported datalogging shot, stock car
http://www.shonutperformance.com/load_comparison.PDF
- Excel chart comparison of secondaries always open and always closed for a
stock SHO
http://www.shonutperformance.com/Emissions_Run_1_+10_PT_Spark.gif
- emissions run with +10 spark (was actually closed throttle)
http://www.shonutperformance.com/Emissions_Run_1_+5_PT_Spark.gif - emissions run with +5 spark
http://www.shonutperformance.com/Emissions_Run_1_No_Changes.gif - emissions run
http://www.shonutperformance.com/TwEECer_MAP_WB.gif - intermediate software datalogging screen
showing MAP and WB
http://www.shonutperformance.com/DIYNO.gif - experimental DIYNO screen (not in released
software)
http://www.shonutperformance.com/AFR_vs_HEGO.gif - Excel plot of measured AFR vs HEGO voltage
http://www.shonutperformance.com/AFR_vs_HEGO_blowup.gif - blow up of above
http://www.shonutperformance.com/LAMBSE_VS_AFR.gif - Log Analyst plot of Lambse (commanded
fueling) vs measured AFR (actual fuel)
http://www.shonutperformance.com/CalConA5.gif - current software datalogging screen
http://www.shonutperformance.com/CalEditA8.gif - current software settings screen
http://www.shonutperformance.com/VSS_mult.gif - example of x10 VSS multiplier
http://www.shonutperformance.com/12_second_run.DB
- Sample Datalog, 12 second run in a blower SHO
http://www.shonutperformance.com/Josh_blower.CCF
- My current program for my blower car, last uploaded 9/10/05, T-trim with a
3.125 pulley, ACCEL 48 lb/hr injectors, high-po FPR, Boost-a-pump, Lightning
80 MAF, +40 cams - still needs lots of tuning, open 2 instances of CalEdit and
compare screen by screen. Note that the
breakpoint is still too high, low slope is still not optimized, high slope is
not optimized etc. etc. ;-)
The TwEECer software will also interface with an external
datalogger to log external signals in the same logfile as the logged EEC
parameters, such as a wideband (WB) O2 sensor and a MAP sensor, and now a
G-force sensor on our Performance page ( http://www.plxdevices.com/Gsensor2Axis.htm
), as well as an AutoMeter full sweep fuel pressure gauge, or even just
volts. These loggers are purchased from
DataQ for $25 and plug into the laptop
via the COM port. http://www.dataq.com/194.htm
http://www.shonutperformance.com/DataQ_Settings.gif - correct settings for the DataQ and a PLX
WB. NOTE when enabling DataQ, you may
have to make the changes, then close CalCon BEFORE you try to log, and then
re-open before trying to log. If you
dont, sometimes you will get an error when you try to log without saving the
changes first by closing the program.
For a PLX WB, connect the black PLX wire to the ground
terminal on the DataQ (as well as your power ground), and connect the white
wire to Channel 1 on the DataQ.
NOTE do NOT install the DataQ software unless you need to
use it for looking at signals other than what comes from your WB. Doing so will over-write the CalCon UltimaSerial
drivers with trial ones, so that you get this message - http://www.shonutperformance.com/UltimaSerial.gif
If you have done this, download this update and install the
two .exes inside in order:
http://www.shonutperformance.com/UltimaSerialUpdate.zip
We are one of the mods of the software section of the
TwEECer BB, and have written a few key posts and posted relevant info, such as:
http://tweecer.oplnk.net/viewtopic.php?t=2255
- 1.30x Datalogging instructions
We also use and recommend the EEC Analyzer software this
software will analyze your TwEECer logs, MAF curve, injector settings, ISC
settings, and help you determine the correct injector settings, give you a
corrected MAF curve (based on either KAMRF or WB feedback), and MUCH MUCH
more. It does all the math and mental
work of getting your tune accurate, and allows you to concentrate on
tuning. Even if you dont buy it right
away, it has very well written explanations of injector settings, MAF curve
settings etc. etc. etc. VERY well worth
the purchase price.
Use this chart for your PIP filter setting (and RPM limits)
- You'll need the latest X2J.DAT update from above to use them properly. Rev limits are now entered as tics, with
this chart:
RPM tics
7000 1190
7100 1174
7200 1157
7300 1142
7400 1126
7500 1111
7600 1096
7700 1082
7800 1068
7900 1055
8000 1042
8100 1029
8200 1016
8300 1004
8400 992
8500 980
8600 969
8700 958
8800 947
8900 936
9000 926
9100 916
9200 906
9300 896
9400 887
9500 877
9600 868
9700 859
9800 850
9900 842
10000 833
If you want to print this, click here, then print the
resulting page:
