Individual V6 Shims outright purchase, E9DZ-6515-XXX or F6DZ-6515-XXX

For custom shim orders of quantities other than our standard sets, simply change the quantity in your shopping cart to match the quantity you want, and include a description of the sizes and individual quantities that you want in the notes section of your order when you check out.

All V6 shims are obsolete. We have a limited supply of certain sizes, listed below. We have a limited supply left of new V6 shims in some cases, and when those run out, you will get used shims, until they run out. A few sizes of Most V8 shims are available new, and we have no used ones. Sizes thicker/thinner than indicated are gone.

V8 shims fit a V6 (a way to get thick/thin shims for your V6), but a V6 shim cannot be used in a V8, since there is no hole in the V6 shim for your blow gun (how the V8 shims are removed – with a blast of compressed air, since there is no notch for your pick in the V8 bucket, like there is with the V6 bucket).

V6 Kit quantities are shown for reference.

V6 Shims

Size	Suffix to	Kit Quantity	Availability	New/Used
(mm)	E9DZ-6515-	56
2.300	N	0	Low	Used
2.325	P	0	Gone
2.350	R	0	Gone
2.375	S	0	Low	Used
2.400	T	0	Available	Used
2.425	U	0	Available	Used
2.450	V	2	Available	Used
2.475	W	4	Available	Used
2.500	X	6	Available	New/Used
2.525	Y	8	Low	Used
2.550	Z	36	Available	New/Used
2.575	AA	0*	Gone
2.600	BA	0*	Gone
2.625	CA	0*	Gone
2.650	DA	0*	Gone
2.675	EA	0	Gone
* We still have a few of these sizes in currently-rented kits, but there is no guarantee that your kit will get them - we can only send them out as we get them back.

V8 Shims

Size	Suffix to	Status	New/Used
(mm)	F6DZ-6515-
2.200	AA	Gone
2.250	BA	Gone
2.300	CA	Gone
2.350	DA	Gone
2.400	EA	Gone
2.450	FA	Low	New
2.500	GA	Available	New
2.550	HA	Gone
2.600	JA	Gone
2.650	KA	Available	New
2.700	LA	Gone
2.750	MA	Gone
2.800	NA	Gone
2.850	PA	Gone
2.900	RA	Gone
2.950	SA	Gone
3.000	TA	Gone
3.050	UA	Gone
3.100	VA	Gone
3.150	WA	Gone
3.250	XA	Gone